丁香五月啪啪

<output id="gfkgv"></output>

<object id="gfkgv"><sup id="gfkgv"><mark id="gfkgv"></mark></sup></object>
  • <dfn id="gfkgv"></dfn>
    1. back to overview

      Weaving Preparation | 14801

      Miscellaneous Warpers -West Point, McCoy-Ellison


      PROPOSAL NO. 14801

      We have available the following Warpers equipment; subject to prior sale:

      PROPOSAL NO. 14801


      1 West Point Warper
      Model D509

      Working Width 54?"
      With Press Roll
      Speed Indicator / Speed Adjustment
      Press Roll Pressure / Comb Traverse Adjustment
      Run / Jog / Stop / Doff Controls
      Yardage Counter

      1 Reed Chatwood LVC Creel
      444 Ends
      13" Centers 6 Package High
      Year: 1992 


      1 McCoy-Ellison Warper
      Model ME-1

      Working Width 72"
      With Press Roll with:
      1 304-End Creel
      Electronic Break Detection System;
      Lindly Model 2070 Yarn Inspection Head;
      Warp Segmenting Stand; and Control 



      1 McCoy-Ellison Warper
      Model ME-1

      Year 1994
      Working Width 66"
      32" Maximum Beam Flange Diameter
      400 Yards/Minute Maximum Beaming Speed
      with Veeder-Root Model PDC-1
      w/o Creel

      1 West Point Warper
      Model 821

      Working Width 54?"
      40" Maximum Beam Flange Diameter
      With Press Roll
      Speed Indicator / Speed Adjustment
      Press Roll Pressure / Comb Traverse Adjustment
      Run / Jog / Stop / Doff Controls
      Yardage Counter
      Year: 1990 


      1 West Point Warper
      Working Width 72"
      Year 1998
      With Press Roll
      Speed Indicator / Speed Adjustment
      Press Roll Pressure / Comb Traverse Adjustment
      Run / Jog / Stop / Doff Controls
      Yardage Counter 

      1 Benninger Warper
      Model Ben-Direct

      Working Width 54”
      Year 2001
      With press Roll
      With Zig Zag Reed and Lint screen
      1 2001 Benninger V Creel
      600 Running Ends
      600 reserve Ends
      Inside Loading & Outside Discharge
      Benninger Ben-Gard Electron stop motion
      Benninger Ben-Tens Tension units
      Automatic cutters
      Package holders at 16 inch vertical & horizontal centers
      Year of manufacture: 2001

      1 West Point Warper
      Working Width 72"
      Year1990
      With Press Roll
      Speed Indicator / Speed Adjustment
      Press Roll Pressure / Comb Traverse Adjustment
      Run / Jog / Stop / Doff Controls
      Yardage Counter

      1 West Point Warper
      Working Width 54"
      Year 1991
      With Press Roll
      Speed Indicator / Speed Adjustment
      Press Roll Pressure / Comb Traverse Adjustment
      Run / Jog / Stop / Doff Controls
      Yardage Counter

      1 West Point Warper
      Working Width 72"
      Year 1992
      With Press Roll
      Speed Indicator / Speed Adjustment
      Press Roll Pressure / Comb Traverse Adjustment
      Run / Jog / Stop / Doff Controls
      Yardage Counter

      1 West Point Warper
      Working Width 72"
      Year 1991
      With Press Roll
      Speed Indicator / Speed Adjustment
      Press Roll Pressure / Comb Traverse Adjustment
      Run / Jog / Stop / Doff Controls
      Yardage Counter

      2 West Point Warpers
      Model 951

      72" x 50" Beam,
      Shaft Diameter is 2-3/8”
      Maximum Beam Flange Diameter 50”
      Max Beam Width outside Flanges 75”
      Journal length approximately 6”
      Beam Width Tip to Tip approximately 75” +6” +6” = 87”
      Distance between Center of Beam Shaft
      to Center of Drive Hole is 6-1/2”
      Year: 1997/1998



      Your consideration and prompt reply will be appreciated.

      丁香五月啪啪

      <output id="gfkgv"></output>

      <object id="gfkgv"><sup id="gfkgv"><mark id="gfkgv"></mark></sup></object>
    2. <dfn id="gfkgv"></dfn>